Sorting backup files by name and date created
Locate a backup file with a specific name or creation date.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Sort the backup files:
•
To sort the backup files by name, select the Backup File Name heading.
•
To sort the files by the date they were created, select the Date Created heading.
Deleting a backup file
Delete a backup file if it is no longer required or is uploaded in error.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Select a backup file and select Delete
.
3. To confirm, select Delete.
Adding an upgrade package
An upgrade package is used to upgrade the projector software.
A maximum of 10 upgrade packages can be stored. When you add an upgrade package that exceeds
this limit, the system deletes the upgrade package that was last used.
1. In the left navigation menu, select Service Setup > System Upgrade.
A list of upgrade files appears in the left pane.
2. Select + Add New Package.
3. Browse to the location of the upgrade package.
4. Type a name for the upgrade package and select Accept.
Installing an upgrade package
Install an upgrade package to update the projector software.
1. In the left navigation menu, tap Service Setup > System Upgrade.
2. In the list of packages, tap an upgrade package.
3. In the right pane, select one of these options:
•
Upgrade Differences Only—Upgrades system components that are newer or older than
the currently installed version.
•
Force Upgrade All—Upgrades all components in the upgrade package.
•
Factory Upgrade—Removes all existing configurations and upgrades all components.
4. Tap Upgrade.
5. To confirm, tap Upgrade.
Backing up, restoring, and upgrading files
Cinema 4K-RGB User Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
94
020-102712-06 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
