Christie Christie DS+10K-J, Service Manual

Page: 68 / 77

6-10 J Series 1000W and 1200W Service Manual
020-100725-04 Rev. 1 (07-2015)
Section 6: Specifications
6.6 Power Requirements
6.6.1 Lamp Specification
Parameter Lamp Power Requirement
Rated Voltage 1200W 200 VAC to 240 VAC
1000W 100 VAC to 240 VAC
Rated Current 1200W 10 A max.
1000W 12 A max.
Line Frequency All 50/60 Hz
AC Input Coupler All 15 A, 250 VAC, IEC 320-C14
Line Cord
(applies to NA cord only) 1200W 16 AWG type SJT with plug, NEMA 6-15P, 13 A
1000W 14 AWG type SJT with plug, NEMA 5-15P, 15 A
Inrush Current All 60 A max
Maximum Power Consumption 1200W 2000W
1000W 1200W
Type Cermax® Xenon lamp system
Power
1200W 800W min, 1200W max (software adjustable)
1000W 700W min, 1000W max (software adjustable)
Rated lamp life to 50% brightness
(2 hours on, 15 min. off duty cycle)
1200W 1000 hours. min
1000W 1500 hours. min
Warm-up time (to full output) 10 minutes max
Operating position Full rotation allowed about the lamp axis.
±15 degrees max tilt of lamp axis from horizontal.
NOTE:
Full 1000W lamp power is available only if AC input is greater than 130 VAC