Christie Christie DS+10K-J, Service Manual

Page: 47 / 77

Section 4: Parts and Module Replacement
J Series 1000W and 1200W Service Manual 4-29
020-100725-04 Rev. 1 (07-2015)
4.10.3 Remove the Lens Mount
(23 minutes)
1. Remove the top cover. See Remove the Top Cover .
2. Remove (3) 3 mm hex screws, which secure the transparent engine
duct. Remove the transparent engine duct.
3. Remove the front lens bezel. See Remove the Front Lens Bezel .
4. Disconnect (5) lens mount harnesses from the lens mount.
5. Remove (4) 3 mm hex screws, which secure the lens mount backing
plate. Remove the Lens Mount.
4.10.4 Remove the Front Air Intake Duct
(11 minutes)
1. Remove the top cover. See Remove the Top Cover .
2. Remove (3) 3 mm hex screws from the transparent engine duct on top of the engine cover. Remove the
engine duct.
3. Remove (1) 3 mm hex screw from the black card cage duct on the side of the card cage. Remove the card
cage duct.
4. Remove (4) 3 mm hex screws from around the black air intake duct.
5. Disconnect fans #4, #5 and #6, the thermal sensor #1 and the front IR sensor harnesses. Remove the intake
duct.