Captiva Service Manual
1
020-000867-03 Rev. 1 (05-2018)
Introduction
This manual applies to Christie Captiva projection system and is intended for Christie accredited
service technicians only. Refer to this manual for technical information required to service and
maintain this product.
Safety Warnings and Guidelines
• This projector is a Class 2 laser device that conforms with IEC 60825-1:2007 and CFR 1040.10
and 1040.11.
• Class 2 laser product, Do Not Stare Into Beam.
• This projector has built-in Class 4 laser module. Never attempt to operate the projector without
all covers properly installed unless instructed to do so in this manual for service.
i
Every effort has been made to ensure the information in this document is accurate and
reliable; however, due to constant research, the information in this document is subject to
change without notice.
Graphics included in this publication are for illustration purposes only.
