Installation of screen:
The length of mounting bracket is as half as long frame. tether is
cut according to distance between up and down mount brackets.
The Edge Series R2 frame screen
user manual
Model: PE-xx(R2)
The mounting brackets should be fixed around middle position of
screen, and proper adjustment might be needed according to
installation environment. The four pcs of moutning brackets
should be installed in level. Hole's distance between up and
down mounting brackets should be overall height minus 56mm.
Please check below:
Up
mounting
bracket
Down
mounting
bracket
Unlocked
Locked
Note: Horizontal and vertical
adjustments are available
for mounting position.
2
8
4
4
4
4
2
8
Distance between
horizontal frame cover
and mounting holes on
bracket
Distance between
horizontal frame cover
and mounting holes
on bracket
D
is
ta
n
c
e b
e
tw
e
e
n i
n
s
ta
lla
ti
o
n
h
o
le
s
o
n m
o
u
n
ti
n
g b
ra
c
k
e
ts
Diagram fro holes on
mounting brackets
For uninstall of screen, unscrew down mounting brackets till it is
loosen from slot of down frame. Lift the screen lightly to make it
go off upper mounting bracket and finish uninstall.
Please make sure the brackets are firmly installed. Hang the
screen onto upper mounting bracket and make adjustment until
upper bracket is at the middle of screen. Let the screen hanged
vertically and tight the screw of down mounting bracket until
screw is attached to slot of down frame. Please check below:
Hang frame onto up
mounting bracket
Adjust down mounting
bracket to lock or unlock
Attach firmly to slot
of down frame
Maintainance
In order to maintain good performance of screen, please
cover the screen with cloth if it is not used for a long term
to prevent dust and dirt from screen. If there are apparent
varias or dirt on screen material, please use soft brush or
cloth to clean it.
Clean the screen material
Rub gently according to grain of velvet frame with warm
water mixed with soft detergent. (Please be noted that it
should be gently rubbed instead of scrubbing hard).
Please prevent from hitting the frame in case of damage
of velvet. By finishing cleaning, let frames dry itself.
Please do not use any dissolvent, chemical agent or any
tool with strong friction for clean, which would cause
permanent damage to the screen.
GRANDVIEW CRYSTAL SCREEN CO., LTD.
Add: No. 43 South International Trade Avenue, Hualong
Town, Panyu, Guangzhou, GuangDong, China
Tel: +86-20-84899499
Distribution:
PureLink GmbH
Available from B2B Online Portal
