Captiva Service Manual
41
020-000867-03 Rev. 1 (05-2018)
Specifications
No
Item
Description
1
Dimensions
(L x W x H)
383*308*86 mm (w/o elevator)
2
Weight
5.5kg (with lens removed)
3
Power Supply
Universal AC 90 – 264V 50/60 Hz with PFC input
4
Brightness
• DHD400S: 2850 ANSI lumens
• DUW350S: 2400 ANSI lumens
5
Contrast
• 1800:1 nominal
• 1600:1 min
6
Uniformity
• JBMA: 80% (typical) / 70% (minimum)
7
Projection lens
• WA22
8
Lamp
Specification
• Type
Nichia 3.5W LASER diode
• Qty
23pcs
• Lifetime
20,000hrs (typical)
• Dominant Wavelength
455nm
10
Throw Ratio
0.25
11
DMD chip
• 0.65” S600 1080p
12
Native resolution
• DHD400S:
1920 x 1080
• DUW350S: 1920 x 720
13
Video Signal
Connectivity
• HDMI In x 2,version 1.4a,HDCP 1.3 compliance, HDMI2 with MHL1.3 support.
• VGA In x 2, 1 sharing with VGA output by OSD setup
• VGA out x1, VESA (HD15) black, Female Provides output loop thru to monitor.
• Composite In x 1, RCA (yellow)
• VGA audio In x 1, 3.5mm phone jack (blue) / stereo
• Composite audio In x 1,RCA-Left (white) / RCA-Right (red) / stereo
• Microphone In x 1,3.5mm phone jack (pink) / mono
• System audio output x 1, 3.5mm phone jack (green) / stereo
• Mini USB x1, for firmware upgrade (USB1.0) / interactive (USB2.0)
• Interactive x1: 3.5mm phone jack, Purpose : dedicated to Light Curtain Touch (LCT)
module connection
• USB A x1 interface, host mode / USB2.0 (for local playback or Wi-Fi dongle)
• RJ45 x1, Fast Ethernet (100Base-T), Purpose : remotely projector control (Crestron /
AMX / PJ-Link)
• RS-232 x1:9-pin RS-232 male (d-sub) x1
• Speaker x1
with 10W (alternatively with system audio output connection)
