manualshive.com logo in svg

Christie 38-FP0001-01, User Manual

Share
Download
Christie 38-FP0001-01 User Manual Download Page 39

38

38-FP0001-02

Troubleshooting

Problem Check 

Item 

Treatment 

Page No.

No picture

Is a computer's signal 

Check a computer manual and

timing (horizontal or Vertical  set the signal timing so that it
synchronous signals) over 

falls within the range for this

41

the range specified for this 

monitor's specification.

monitor ?

Screen's display 

Is the computer's screen 

Reset the screen size.

–

range is incorrect.

size set correctly ?

Part of screen is 

Is the adjustment for screen

Adjust the screen.

12

missing.

correctly ?

Picture is distorted.

Is the RGB or DVI cable

Check the RGB or DVI cable 

7

connected securely ?

connection.

Is the screen adjusted 

Adjust the screen correctly.

12

correctly ?

The computer's signal timing  Check the computer’s 
may not match the monitor's  specifications.

–

specifications.

Not change to 

Is the cable connected 

Check the RGB or DVI

7

another input signal. exactly?

cable connection.

Fault Finding

Please check the following items before requesting repair. When this LCD monitor still
does not work properly after checking in following way, stop using it, turn off the power
switch, unplug the power plug from the AC Outlet, and contact the store where it was
purchased. In case a COMPUTER is connected, please refer to the User's Manual for
this LCD monitor also.

• This monitor conforms to the WXGA mode (1,280 x 768 dots).

• This monitor does not support the computer’s display mode which is larger than

WXGA mode (1,280 x 768 dots). Its display is possible but there is no guarantee.

• Displaying the same screen for an extended period of time may leave a residual

image; this does not indicate a broken or defective display. The display will return to
normal after the power is turned off and the unit stands for a while. Use of a screen
saver is recommended.

• Bright dots (dots that remain lit) or black dots (unlit dots) on the LCD monitor’s display

are normal; they do not indicate a broken or defective display.

• When a LCD monitor shows the Composite Video, S-Video and etc., it is displayed

on a little bit wider screen which compares to a normal television set. Depend on the
image, it might be possible to show it on a full screen.

Screen Display

Summary of Contents for 38-FP0001-01

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands