14
38-FP0001-02
Mode
You can change or indicate the signal input type following the steps.
Change or indicate the input signal
1.
While the OSD (On Screen Display) is not displayed, it is possible
to change or indicate the current mode.
Press [
Source
] key to indicate the current mode in the lower right corner
of the screen.
Analog RGB1
Mode: 88
1024 x 768 / 75 Hz
(Ex.)
2.
While displaying the current mode, press [Source] key again.
Start searching another mode according to the order [
Analog RGB1
]
/
[
Analog RGB2
]
/
[
Digital RGB
].
[
Analog RGB1
]
/
Switch to the signal from RGB connector.
[
Analog RGB2
]
/
Switch to the signal from R/G/B/HD/VD connector.
[
Digital RGB
]
/
Switch to the signal from DVI connector.
• Every time the input signal is searched, display the searched and stop
searching picture.
• The current mode is indicated for each input signal type as follows:
Analog RGB1
Mode: 88
1024 x 768 / 75 Hz
Digital RGB
Mode: 88
1024 x 768 / 75 Hz
Analog RGB2
Mode: 88
1024 x 768 / 75 Hz
In case there is no signal when the screen is on, the screen will be in the waiting
mode and nothing is shown.
NOTE
