Freeze-dryer Epsilon 1-4 LSCplus
Freeze-dryer Epsilon 2-4 LSCplus
6 Operation
72 / 148
Version 04/2014, Rev. 2.13 of 01/12/2021
• sb
Translation of the original operating manual
Pos : 180 /200 Chris t/360 GT-BA Labor-Pil ot ( STAND ARDMO DULE)/060 Betrieb/LSC plus /060- 0050-0010- 0021 H auptf ens ter Programm Epsilon @ 72\mod_1593154326974_68. doc x @ 766699 @ 4 @ 1
6.6.1.2
Main window "Program"
In the main window "Program", pre-programmed freeze-drying processes
can be loaded and edited and new programs can be created with the
PGMplus programmer module.
1
Program list
2
Button "New
program"
3
Buttons "Load"
Fig. 33: Overview of the main window "Program"
Program list (1)
After the selection of the main window "Program", an overview of the
programs that have already been saved will be displayed. Pressing the
button "Load" (3) behind the program name calls up the program data.
Programs can be loaded, edited, copied, or deleted (see chapter 6.6.3 - "
Freeze-drying with the PGMplus programmer module ").
"Dialog box "New program (2)
In this dialog box, new programs can be created either based on an already
existing program or completely from scratch (see chapter 6.6.3.1 -
"Creating a program").
Pos : 181 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
