Christ 112991 Operating Manual Download Page 36 | Manualshive

Page: 36 / 148

background image

Freeze-dryer Epsilon 1-4 LSCplus

Freeze-dryer Epsilon 2-4 LSCplus

3 Safety

36 / 148

Version 04/2014, Rev. 2.13 of 01/12/2021

• sb

Translation of the original operating manual

Pos : 92 / 200 C hrist/ 360 GT-BA Labor-Pilot (ST ANDARDM ODU LE)/ 030 Sic her heit /030-0020 Sic her heit Epsilon/ 030- 0070-0120 G ef ahren durc h die Beladetür @ 36\mod_1435912260731_68. docx @ 266935 @ 3 @ 1

3.7.12 Hazards caused by the loading door

WARNING

Risk of crushing caused by the movement of the loading door

Due to its relative high mass, the movement of the loading door can
hardly be slowed down or stopped.

There is a risk of crushing of body parts between the door and the front of
the chamber.
• Move the loading door slowly holding the door handle when opening or

closing it. Do not hold the door leaf by its edge!

• Lock the door by turning the door handle!

Pos : 93 / 010 U nivers almodule/ Leerz eile @ 0\m od_1202116244500_0. doc x @ 114 @ @ 1

Pos : 94 / 200 C hrist/ 360 GT-BA Labor-Pilot (ST ANDARDM ODU LE)/ 030 Sic her heit /030-0020 Sic her heit Epsilon/ 030- 0070-0140 G ef ahren durc h heiß e Oberfl ächen Epsil on @ 36\m od_1435914428468_68. docx @ 266963 @ 3 @ 1

3.7.13 Hazards caused by hot surfaces

WARNING

Risk of burns on hot surfaces

During the operation of the freeze-dryer and half an hour afterwards, the
outer surface of the freeze-dryer (especially the pipes and units) may be
hot.

There is a risk of burns when touching the surfaces.
•  Wear suitable protective clothes and gloves!
•  Do not touch the surfaces on purpose!
•  Prior to performing any maintenance work on the vacuum pump or the

oil mist separator, let the components cool!

WARNING

Risk of burns on hot surfaces

After a drying process, some or all of the surfaces inside the chamber
(chamber walls, shelves, intermediate valve, etc.) may still be hot.

There is a risk of burns when touching the surfaces.
•  Wear suitable protective clothes and gloves!
•  Do not touch the surfaces on purpose!
•  Prior to performing any work on the freeze-dryer, let the components

cool!

Pos : 95 / 010 U nivers almodule/ Leerz eile @ 0\m od_1202116244500_0. doc x @ 114 @ @ 1

Pos : 96 / 200 C hrist/ 360 GT-BA Labor-Pilot (ST ANDARDM ODU LE)/ 030 Sic her heit /030-0020 Sic her heit Epsilon/ 030- 0070-0150 G ef ahren durc h k alt e O berfläc hen Epsilon @ 36 \mod_1435915226275_68. doc x @ 266977 @ 3 @ 1

3.7.14 Hazards caused by cold surfaces

WARNING

Risk of freezing to cold surfaces

The shelves and ice condenser coils can already be cold during the
loading phase.

There is a risk of freezing to the shelves or ice condenser coils when
touching the surfaces.
• Wear suitable protective clothes and gloves!
• Do not touch the surfaces on purpose!

Pos : 97 / 010 U nivers almodule/ Seitenw ec hsel @ 0\m od_1202116244312_0. docx @ 105 @ @ 1

«
...
34
35
36
37
38
...
»

Summary of Contents for 112991





















































































































































Reviews:

No comments

Related manuals for 112991

Brand: Hagie Pages: 61

Brand: Sagola Pages: 8

Brand: NEC Pages: 54

Brand: Nakayama Pages: 37

Brand: Datavideo Pages: 28

Brand: Parker Pages: 39

Brand: Gaspardo Pages: 196

Brand: RAB Pages: 2

Brand: Yamaha Pages: 46

Brand: OAKWORKS Pages: 2

Brand: Oakton Pages: 2

Brand: Oakton Pages: 2

Brand: O2matic Pages: 4

Brand: Safavieh Pages: 2

Brand: Vendlet Pages: 2

LED Street Bar 16x3W RGB IP65

Brand: Varytec Pages: 9

Brand: VARILITE Pages: 8

EVENTPROFILE VL800

Brand: Vari Lite Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands