MODEL C2® Plus & MODEL G™ Plus Feeding System
Installing the Suspension System
MF1255C
15
6. After securing the Ceiling Hook to the truss, slide
the hook of a Swivel Pulley into the slot, as shown
in
Figure 17
.
Drop Installation
Refer to
Figure 12
on page 11.
1. Attach a 3004 Pulley to each hook.
2. Thread the end of the 3/32" or 1/8" cable through the pulley toward the winch. Clamp this end to the
3/16" winch cable about 6"
[150 mm]
from the last pulley, using a 3/16" cable clamp. See
applicable figure;
Figure 13 or 17
.
3. Allow enough cable length for installation of the Adjustment Leveler.
Sufficient cable is included to provide "throwbacks" on drops located beneath and near the winch.
Figure 18
shows a "throwback" cable arrangement.
4.
Begin installing suspension drops at the winch and proceed to the ends of the feeder line.
Keep the main cable tight between drops. It may be necessary to hang a weight on the end of the
cable to maintain tension on the line.
1255-78 1/2001
1)
Wood Truss
2)
Ceiling Bracket
3)
1/4" Lag Screw
4)
Swivel Pulley
5)
3/32" Drop Cable
Figure 17. Pulley Installation
967-4 2/01
Figure 18. "Throwback" cable arrangement