Operation
44
Amateur radio data communication with computer connections
X5105 transceiver can connect with computer and complete all kinds of data communication with corresponding computer software.
Operation wire method:
1
、
From the ACC interface (MINI-DIN8), the computer audio output / input is connected to X5105.
2
、
Insert the data wire of the distribution into com (or CIV) interface, and connect the X5105 to the computer, and ensure that the data wire computer
driven and installed correctly with PC software can control the X5105 transceiver;
3
、
Adjust the volume of the X5105 ACC interface input / output volume to the appropriate, observe the software interface to avoid too much audio to
communicate.
4
、
Select the corresponding working mode, you can carry out data communication.
To prevent interference , the station and computer must be grounded well , and the data cables and audio wires should be fitted with EMC magnetic
rings and installed as close as possible to the end of the station .
