Operation
24
Set working frequency
2
、
Using multifunctional manual frequency setting
Press
[F-INP ENT]
button, X5105 goes into the frequency setting state and the cursor flashes the first bit on the left of the frequency display
bit;
Enter the frequency value you want to set in turn, and press
[F-INP ENT]
button again to complete the frequency setting.
For example, set the current frequency to 51.50000MHz, press button in the following order:
1.
First press the[
F-INP ENT
] button;
2.
Press the5 1 . 0 5 0 0 0 0 numbering button in turn;
3.
Press[
F-INP ENT
] button again to complete the setup.
The X 5 105 sets the frequency in two ways, including a large
knob to set the frequency, and a multi-function handheld
frequency setting.
Operation method:
1
、
Frequency setting with a large knob
Press the cursor of button [<] and [>] to move the
frequency bit left or right, and select the
frequency bit of the desired stepping;
Rotate the frequency knob to set the frequency of
the current step carry.
X5105
T/R DATA LINK
LOCK
PRE
ATT
MODE
MENU
V/M
A/B
NB
RIT
ATU
Po
<
大旋钮
步进位选择按键
Step bit selection
Large knob
