Charge and maintenance of battery in machine
10
X5105 has built-in 3800mAh polymer lithium battery pack. When the external power supply is not connected , a power supply is supplied to the whole
machine by a battery pack ;When the external power supply is connected , the internal circuit of the machine is automatically switched to the external power supply .
Screen display information in shutdown
charging
Vext: Display external supply voltage
Vbat: Displays the current real - time voltage of
the battery
5
、
The maximum charge time is about 10
～
12 hours. When the battery is fully charged, the
charge will automatically stop, and the screen will show the end of the charge, as shown in
the right picture.
After charging, the battery voltage is generally between 12. 1 V and 12. 5 V, which are all
normal.
Charging method:
1
、
In the MENU - 7,
【
CHG
】
option is the charging switch.
2
、
Select "Charger ON" and open the charging function.
3
、
Select "Charger off "and turn off charging.
4
、
Set the external power supply voltage between 13.5V and
15.0V, connect to the X5105 external power supply
interface, the host will start charging automatically.
Note: on shutdown, the X 5105 will automatically be
charged by inserting the appropriate external power
Charging…
Vext=13800mV
Vbat=11800mV
Charge Finish
Vext=13800mV
Vbat=12200mV
Display information on screen after charging
