Chloride LP061XHR, User Instruction Manual

Page: 16 / 33

Installation
11 Chloride Linear Plus Series Rack-mount UPS User Instruction Manual
Terminal Blocks for
UPS
The following figures show the units with the external battery extension.
To connect the external battery to the UPS, plug the battery cable (16) into the socket (9) and into a battery
extension socket (13).
Fig. 5: Rear View Linear Plus Rack-mount UPS (top), Battery (center), and Cable (bottom)
Legend:
NOTE: Each external battery cabinet is supplied with one battery connection cable (16). The first
16
14
12
15
13
16
| o
1. Output socket(s) IEC 320 - C19
2. 2 Output circuit breaker (for plugged outlets)
3. Input miniature circuit breaker
4. Fan
5. Cover of parallel port
6. Communication Slot (Option)
7. ESD Contacts (control)
7a. ESD Contacts, hardwired
8. UPS interface COM 3
9. Battery socket
10. Strain relief
11. Mains connection, Terminal Block
12. Battery socket for battery connection cable to
UPS
13. Battery extension cable socket. Connected to
UPS or another battery extension
14. Battery extension circuit breaker
15. Earth connection
16. Battery extension connection cable
17. S1, S2: Paralleling terminals (bridged 10
mm
2
if UPS works in single block mode,
open if UPS in parallel operation)
18. Terminals for backfeed control