Chipcon AS
SmartRF
®
CC2420DBK Demonstration Board Kit User Manual
(rev. 1.3) 2004-11-03 Page 50/ 52
References
CC2420 Datasheet:
http://www.chipcon.com/index.cfm?kat_id=2&subkat_id=12&dok_id=115
Atmel ATmega 128L data sheet:
http://www.atmel.com/dyn/resources/prod_documents/doc2467.pdf
Atmel Application note: AVR109 Self-programming (Bootloader CC2420DBK based on this
application note)
http://www.atmel.com/dyn/general/tech_doc.asp?doc_id=8053
AVR Studio:
http://www.atmel.com/dyn/products/tools.asp?family_id=607
AVR GCC:
http://www.avrfreaks.net/AVRGCC/index.php
WinAVR:
http://sourceforge.net/projects/winavr/
IEEE 802.15.4 standard
http://standards.ieee.org/getieee802/802.15.html
Document History
Revision
Date
Description/Changes
1.0 31.03.2004
Initial
release.
1.1
06.05.2004 Updated schematics and BOM according to
CC2420DB revision 1.2 References to figures
corrected. Added antenna gain figure and information
of Baud rate deviation on RS-232 interface to PC.
Included information about the protection bit that
prevents accidental overwriting of the bootloader
section of flash.
1.2
26.07.2004
Updated LED text layout and BOM with new crystal
specifications according CC2420DB revision 1.4.
Added information about external RAM, ZigBee
memory requirements, low power mode and
CC2420DB temperature range. Updated
microcontroller fuses and bootloader step-by-step
procedure.
1.3
03.11.2004
Updated memory requirements. Added procedure on
how to start a new debugging project with CC2420DB
using JTAG ICE mkII. Added details about the 64-bit
IEEE address preprogrammed on the each
CC2420DB. Updated information about the
preprogrammed fuse settings. Added information
about current measurements and RS-232 driver
software control. Updated Troubleshooting for
bootloader.
