To further insulate the hush clamp, slide a length of appropriate sized silicon
tube over the Teflon tube where the hush clamp will be placed. The silicon
isolator will protect the “o” ring as well as the clamp from the intense heat of
the exhaust.
The rear pipe mount needs insulating from the heat also, we recommend the
“60” Hush clamp with silicon insulation as described for the front hush clamp
installation.
The fibreglass pipe tunnel may now be fitted, ensure that any holes necessary
for the installation of the pipe mounts are already drilled to ensure a easy
installation.
This can be screwed in place or glued with 20 minute epoxy and micro
balloons. The section of the tunnel over the undercarriage mounting plate
(between the two adjacent formers) will need to be carefully removed with the
razor saw, after the tunnel has been fixed in place.