Now remove the pins and then carefully drip thin CA onto the exposed section
of each hinge as pictured below. Gently work the aileron up and down while
adding CA. This will help the CA to fully wick into each hinge.
We suggest adding CA to the inner and outer most hinges first, as this will
help ensure that the aileron is properly aligned with the wing itself and avoid
tapering wing/aileron gaps.
Repeat the above process for the second wing panel and aileron.
If available, use Acetone dripped onto a rag to wipe away any excess CA that
happens to run. Use denatured alcohol to clean up later.