24
via Costituzione 50/D 4201 5 Correggio (RE) Italy - Tel. +39 0522 637224 Fax. +39 0522 631 1 80 [email protected]
STOPPING THE MACHINE
Turn the power supply switch to "0" (OFF). This will also discharge the air from the pneumatic
cylinders.
Emergency Stop. This will shut the machine down immediately and discharges the air from the
pneumatic cylinders. It works when the red mushroom shaped button on the START pedal pedestal.
The fact that the emergency button is on the control console ensures that it is always within easy
reach of the operator whatever work position is adopted.
MAINTENANCE
DISCONNECT THE MACHINE
Before any kind of service, maintenance or repair work, disconnect the machine from its power
sources by removing the plug from the power socket and disconnecting the compressed air hose.
SPECIAL PRECAUTIONS
When doing service, maintenance or repair work, follow these recommendations:
Do not use solvents or flammable substances.
Do not stand on any part of the machine as it has not been designed to hold the weight of a
person.
At the end of the work, replace the guards and casings removed or opened and fix them correctly.
CLEANING THE MACHINE
It is good standard operating practice to clean the machine on a regularly scheduled basis
(frequency will depend on how and how much the machine is used). Clean the machine throughout
using a vacuum cleaner and compressed air.
Disconnect all machine power sources.
Before cleaning the machine the operator must be equipped with all suitable protective clothing and
devices.
ROUTINE MAINTENANCE
The simple design of the machine reduces routine maintenance to checking retainer tightening
performance regularly since vibration can have caused them to slacken off. The compressed air
fittings use special seals that do not require lubrication. The air filter condensation collecting jar
automatically drains when the circuit is depressurised.
Weekly: depressurise the "speedy t 2005". Clean the stacker photocell with compressed air.
EXTRAORDINARY MAINTENANCE
The operations for which reference should be made to Authorised Technical Assistance Centres are
listed below. However, they can also be done by qualified Service Engineers authorised by
Manufacturer.
Extraordinary maintenance includes work needed because of unusual events such as:
Breakage
Overhauls
MAINTENANCE
Summary of Contents for Speedy T 2005
Page 2: ......
