5
via Costituzione 50/D 4201 5 Correggio (RE) Italy - Tel. +39 0522 637224 Fax. +39 0522 631 1 80 [email protected]
GENERAL NOTICES
The Operator must read carefully and understand fully all the information given in this Manual and
especially all the safety precautions given in this section.
Keep the machine and its work area clean and tidy.
Do not remove or alter the plates and stickers attached to the machine by Manufacturer.
DO NOT REMOVE OR BY-PASS THE SAFETY SYSTEMS INSTALLED ON THE MACHINE.
SCHEDULED USE
The machine has been designed and built to facilitate the folding of garments such as T-shirts.
It can be adapted to fold other kinds of garments provided Manufacturer checks the adaptation in
advance.
OPERATOR
The personnel required to operate the machine must possess (or achieve the required competence
through adequate training programmes) the ability detailed below and have read and understood
the content of this Manual and all the information on safety matters.
General and technical education at a level sufficient to understand the content of this manual and
interpret the Figures, diagrams and schematics correctly.
Knowledge of safety, industrial accident prevention and technical regulations.
Know how to act in an emergency, where to find individual protection equipment and how to use it
correctly.
Maintenance Engineers, in addition to the abilities detailed above, must also possess adequate
technical training.
IMPROPER USE
The machine must not be:
Used for purposes other than those detailed.
Exposed to the weather.
Used to fold material not suitable for its characteristics such as paper or other stiff materials.
Operated by children or untrained personnel.
SAFETY DEVICES
The machine cannot be completely protected since in this condition its operation would be
impeded.
Therefore, pay special attention to prevent hands from being crushed.
The low level pressure used reduces the risk of serious personal injury to a considerable extent.
SAFETY
Summary of Contents for Speedy T 2005
Page 2: ......
