10
via Costituzione 50/D 4201 5 Correggio (RE) Italy - Tel. +39 0522 637224 Fax. +39 0522 631 1 80 [email protected]
ENVIRONMENTAL CONDITIONS
The machine does not need any special environmental conditions. It should be installed in a well
lighted and ventilated factory building with a level floor designed to handle the weight of the
machine. Working area temperature range: 5°- 40° C, with humidity not above 50% at 40°C or not
above 90% at 20° C.
AREA LIGHTING
The lighting in the work area must be in compliance with the current regulations in the country
where the machine is installed and must guarantee good visibility over the entire area without
creating dangerous reflection.
VIBRATION
Under working conditions in compliance with the instructions for correct use of the machine, no
annoying levels of vibration will be encountered.
NOISE LEVEL
The machine is designed and built to reduce the noise generated as much as possible. The
machine's noise level is:
Noise level Lwa = 75 dB ( as measured )
Declared constant K = 4 dB
NOTE: The noise level mentioned above is the actual noise level measured and does not
necessarily mean a safe noise level. Though noise level and noise exposure level are related, the
measured noise level in itself cannot be used as an entirely reliable method for determining whether
or not additional ear protection devices should be used. The factors that determine the noise level
to which the workers are exposed include: exposure duration, characteristics of the work area and
other sources of noise ( number of machines, near by manufacturing processes, etc.). Furthermore,
noise exposure levels can differ from country to country. In any case, the information given in this
manual will enable the owner of the machine to make a better appraisal of the hazards and dangers
the machine generates.
ELECTROMAGNETIC ENVIRONMENT
The machine has been designed and built to work correctly in an industrial environment. It falls
within limits for Emission and Immunity required by the following Harmonised Standards:
EN 50081 -2 Electromagnetic compatibility. General emission standards, Part 2. Industrial
Environment - ( 1 993 ).
EN 50082-2 Electromagnetic compatibility - General Immunity standards - Part 2 - Industrial
Environment - ( 1 995 ).
Summary of Contents for Speedy T 2005
Page 2: ......
