INST.No.INE-454-P2 Software
Ver.1.2
- 1 -
1.1 Digital display
After the installation, the connections and the
wirings are completed, turn all mains power on.
Measurement starts and the measured value is
displayed in the main display.
When the low alarm or the high alarm activates, the
status marker “
AL
” or “
AH
” will light.
(on the condition that the low alarm or the high
alarm has been programmed)
(1) Main display :7-segment LCD 4 digits ..
Displays measured value or parameters
(2) Sub display : 7-segment LCD 4 digits ..
Displays parameter menus.
(3) Sub marker :
ε
… Emissivity
(4) Status marker
: AL … Low alarm
: AH … High alarm
(5) Temperature unit : C … ºC (Celsius)
F …ºF (Fahrenheit)
(6) Measuring wavelength display : Nothing is indicated
…1.55/1.35um at “2col”
…1.55um at “1col” “2c2” “2c1” “inG2” inG1” and “Si”
: 1 Indicated (
*
) …1.35/0.9um at “2col”, …0.9um at “1col”
(
*
) is indicated at [3.1.2 Emissivity (ratio) programming 2]
2.1 Parameter programming/selection
(Operating mode)
In the measurement mode, program or select a
parameter by using
SEL
key.
The operator mode covers programming or
selection of emissivity, automatic emissivity
calculation, signal modulation mode, modulation
degree, and alarms. For each program menu,
refer to [3. Operating mode].
The right figure shows the flow chart of the
parameter menus by pressing
SEL
key in the
measurement mode.
Tb CONT MEM PEAK
AL
AH
C
F
ε
(1)
(3)
(2)
(4)
(5)
[Measurement mode]
The measured value is displayed
in the main display.
Nothing is displayed in the sub display
and in the sub marker.
1. Operation
2. Operating mode and engineering mode
M easurem ent m ode
M odulation
T im e constant
A larm m ode
E m issiv ity (ratio) program m m ing 1.55/1.35um
E m issiv ity program m m ing 1.55um
A larm tem perature
A utom atic em issiv ity calculation
O p erating m o d e
A utom atic em issiv ity
calculation enable
Y
D am ping degree
D elay
Y
SEL
S E L
S E L
S E L
S E L
SE L
SE L
disable
P eak
N
E m issiv ity (ratio) program m m ing 1.35/0.9um
E m issiv ity program m m ing 0.9um
S E L
