INST.No.INE-454-P2 Software
Ver.1.2
- 11 -
4.3.2 Peak hold reset type selection
(Selection of the outside reset
･･･
Model IR-CAQ
J
only)
(It is necessary to select when the peak hold is selected in [4.3.1 Hold function type selection].)
4. Engineering mode
【
Peak hold (Reset disable)
】
Input
Output
T
R
T
R
【
Peak hold internal (Time reset)
】
Input
Output
【
Peak hold external (Remote contact reset)
】
Inpu
t
Output
External contact output
[Reset types]
no
: Reset disable
in
: Internal (time reset)
Et
: External (remote
contact reset)
Tb CONT MEM PEAK
AL
AH
C
F
ε
[Reset disable]
Main display
Sub display
1) After the selection of “
PEAk
” in [4.3.1 Hold function type
selection], press
SEL
key until “
HrSt
” (selection screen of
peak hold reset type) appears in the sub display
as shown in the
right figure.
2) By pressing
key, “
no
”, “
in
” or “
Et
” will blink in the main
display.
3) Use
or
key to select the desired type.
4) To activate this selection, press
ENT
key.
Tb CONT MEM PEAK
AL
AH
C
F
ε
[External reset]
Main display
Sub display
Tb CONT MEM PEAK
AL
AH
C
F
ε
[Internal reset]
Main display
Sub display
•
The default is
no
(reset disable).
Remarks
C aut ion
T
R
: Reset time (0.0 to 99.9 sec)
Hold time is less than 0.0 to
0.1 in 0.0 programmed.
C aut ion
For the remote contact reset is
reset by the remote contact
input. (The pulse width is
required more than 55msec for
the remote contact input)
