[DB600] General Instruction Manual
- 63 -
Reference
Release key lock
You cannot set/change a parameter when the key lock is enabled. At a registration
of set contents, the PV display screen shows "
" and a measured value
(PV) alternately. See the section 5-14 to disable the key lock.
Digits for setting numeric values
Carrying, borrowing and minus operations are performed automatically.
Pressing the
key at "09" makes "10".
Pressing the
key at "10" makes "09".
Pressing the
key at "_ 0" makes "-1000".
Cursor move
Pressing the
key moves the cursor to a digit to right available for
setting/changing.
Automatic recovery from the setting screen
When approximately 3 minutes have passed without key operation during a setting
or checking process, the screen will switch to the operation screen.
5-1-3
How to operate parameter setting
The following shows how to set a value for event 1 of group 1.
- Setting procedure -
(1)
Press and hold the
key on the operation screen to display the MODE0 initial setting
screen.
(2)
Press the
key to display the MODE3 initial screen.
