[DB600] General Instruction Manual
Operation screen (program operation)
- 60 -
4-5
Cautions for operation
4-5-1
Setting/changing a parameter during operation
Setting/changing a parameter during operation is available except on some setting screens. Please pay
attention to set/change a parameter during control operation since some parameters may negatively affect
the control.
4-5-2
Cautions for SV slope operation
SV changes over time while SV slope operation is performed using SV rate of change. Since the SV
during the operation is displayed with up to 5 digits, the accurate executing SV including decimal point
cannot be displayed. Hence, an error up to ± 1 digit occurs on the display; however, control calculation is
performed using the accurate SV in the internal process.
Note that the time accuracy for this SV slope operation is not as high as that of a clock.
Caution
Please pay attention to set/change a parameter during operation.
Some parameters may negatively affect the control.
Use a high quality, stable power supply. If not, the instrument may
suffer an adverse effect or malfunction unexpectedly by the
influence of noise or momentary power failure.
!
