USB Port
Playing from a USB
A USB mass storage device can be connected to the USB port.
The USB port is in the upper instrument panel storage area.
Five volts DC power is limited to one-amp from this port. Devices such as iPad that require greater current will not charge
from this port.
USB MP3 Player and USB Drives
• The USB MP3 players and USB drives connected must comply with the USB Mass Storage Class specification
(USB MSC) and supports formats of FAT32,FAT16, and HFS+.
• Hard disk drives are not supported.
• The radio will not be able to play back write-protected music.
• The following restrictions apply for the data stored on a USB MP3 player or USB device:
– Maximum folder structure depth: eight levels.
– Maximum number of MP3/WMA files that can be displayed: 10,000.
– Playlist entries must be in the form of relative paths.
– The system attribute for folders/files that contain audio data must not be set.
To play a USB device, do one of the following:
• Connect the USB and it begins to play.
• Press the Now Playing or USB screen button on the Home Page.
• Press SRCE to scroll until the USB source screen is available.
• Press
b
/
g
on the steering wheel controls to play USB, Artist, Album, Song Title, or Song Genre. See Voice Recognition.
The following playlist formats are supported:
• M3U (Standard and Extended)
• iTunes
• PLS (Standard)
While the USB source is active, use the following to operate:
PUSH SEL Knob: Turn to scroll through the list. Turn quickly to fast scroll alphabetically through large lists.
©
SEEK (Previous/Reverse):
• Press to seek to the beginning of the current or previous track. If the track has been playing for less than eight
seconds, the previous track plays. If playing longer than eight seconds, the current track restarts.
• Press and hold to reverse quickly through tracks. Release to play the track landed upon.
SEEK
¨
(Next/Forward):
• Press to seek to the next track.
• Press and hold to advance quickly through tracks. Release to play the track landed upon.
