Chevrolet Silverado 2004 Owner'S Manual Download Page 517

Page: 517 / 584

Vehicle Care/Appearance Materials

See your GM dealer for more information on purchasing
the following products.

Description

Usage

Polishing Cloth
Wax-Treated

Interior and exterior
polishing cloth.

Tar and Road
Oil Remover

Removes tar, road oil,
and asphalt.

Chrome Cleaner
and Polish

Use on chrome or
stainless steel.

White Sidewall
Tire Cleaner

Removes soil and black
marks from whitewalls.

Vinyl Cleaner

Cleans vinyl tops,
upholstery, and
convertible tops.

Glass Cleaner

Removes dirt, grime,
smoke and fingerprints.

Chrome and Wire
Wheel Cleaner

Removes dirt and grime
from chrome wheels and
wire wheel covers.

Finish Enhancer

Removes dust,
fingerprints, and surface
contaminants. Spray on
wipe off.

Description

Usage

Swirl Remover Polish

Removes swirl marks, fine
scratches, and other light
surface contamination.

Cleaner Wax

Removes light scratches
and protects finish.

Foaming Tire Shine
Low Gloss

Cleans, shines, and
protects in one step.
No wiping necessary.

Wash Wax Concentrate

Medium foaming
shampoo. Cleans and
lightly waxes.
Biodegradable and
phosphate free.

Spot Lifter

Quickly removes spots
and stains from carpets,
vinyl, and cloth upholstery.

Odor Eliminator

Odorless spray odor
eliminator used on fabrics,
vinyl, leather and carpet.

See your General Motors parts department for these
products. See Recommended Fluids and Lubricants on
page 6-13.

5-121

Summary of Contents for Silverado 2004









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Silverado 2004

Reviews:

Related manuals for Silverado 2004

Brands by name

Popular brands

Chevrolet Silverado 2004, Owner'S Manual

Search results

Summary of Contents for Silverado 2004

Reviews:

Related manuals for Silverado 2004

Brands by name

Popular brands