Chevrolet Silverado 2004 Owner'S Manual Download Page 413

Page: 413 / 584

A. Engine Air Cleaner/Filter. See Engine Air

Cleaner/Filter on page 5-25.

B. Coolant Surge Tank. See Engine Coolant on

page 5-35.

C. Air Filter Restriction Indicator (If Equipped). See

Engine Air Cleaner/Filter on page 5-25.

D. Engine Oil Dipstick. See Engine Oil on page 5-20.

E. Automatic Transmission Dipstick (If Equipped).

See Automatic Transmission Fluid (Except Allison
Transmission

) on page 5-27 or Automatic

Transmission Fluid (Allison Transmission

) on

page 5-30.

F. Engine Oil Fill. See Engine Oil on page 5-20.

G. Fan. See Cooling System on page 5-41.

H. Remote Negative (

−

) Terminal (GND). See Jump

Starting on page 5-53.

I. Power Steering Fluid Reservoir. See Power Steering

Fluid on page 5-46.

J. Remote Positive (+) Terminal. See Jump Starting on

page 5-53.

K. Brake Fluid Reservoir. See Brakes on page 5-49.

L. Clutch Fluid Reservoir (If Equipped). See Hydraulic

Clutch on page 5-34.

M. Underhood Fuse Block. See Fuses and Circuit

Breakers on page 5-123.

N. Battery. See Battery on page 5-52.

O. Windshield Washer Fluid Reservoir. See Windshield

Washer Fluid on page 5-47.

5-17

Summary of Contents for Silverado 2004









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Silverado 2004

Reviews:

Related manuals for Silverado 2004

Brands by name

Popular brands

Chevrolet Silverado 2004, Owner'S Manual

Search results

Summary of Contents for Silverado 2004

Reviews:

Related manuals for Silverado 2004

Brands by name

Popular brands