Chevrolet Silverado 2004 Owner'S Manual Download Page 243 | Manualshive

Page: 243 / 584

background image

Adjusting the Speakers (Balance/Fade)

AUDIO: To adjust the balance to the right and the
left speakers, push and release the AUDIO knob until
BAL appears on the display. Turn the knob to move the
sound toward the right or the left speakers.

To adjust the fade to the front and the rear speakers,
push and release the AUDIO knob until FADE appears
on the display. Turn the knob to move the sound
toward the front or the rear speakers.

To adjust the balance and fade to the middle position,
push the AUDIO knob, then push it again and hold
it until the radio produces one beep. The balance and
fade will be adjusted to the middle position and the
display will show the speaker balance.

To adjust all tone and speaker controls to the middle
position, push and hold the AUDIO knob when no tone
or speaker control is displayed. ALL will appear on
the display, you will hear a beep, and the display level
will be adjusted to the middle position.

Finding a Program Type (PTY) Station
(RDS and XM™)

To select and find a desired PTY perform the following:

1. Turn the P-TYPE knob to activate program type

select mode. TYPE and a PTY will appear on
the display.

2. Turn the P-TYPE knob to select a PTY.

3. Once the desired PTY is displayed, press the

SEEK TYPE button or one of the SEEK arrows
to take you to the PTY’s first station.

4. To go to another station within that PTY and the

PTY is displayed, press the SEEK TYPE button
once. If the PTY is not displayed, press the SEEK
TYPE button twice to display the PTY and then
to go to another station.

5. Press the P-TYPE knob to exit program type

select mode.

If PTY times out and is no longer on the display, go
back to Step 1.

If both PTY and TRAF are on, the radio will search for
stations with the selected PTY and traffic
announcements.

If the radio cannot find the desired program type, NONE
will appear on the display and the radio will return to
the last station you were listening to.

SCAN: Scan the stations within a PTY by performing
the following:

1. Turn the P-TYPE knob to activate program type

select mode. TYPE and a PTY will appear on
the display.

2. Turn the P-TYPE knob to select a PTY.

3-79

«
...
241
242
243
244
245
...
»

Summary of Contents for Silverado 2004









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Silverado 2004

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 2

Brand: Yakima Pages: 12

Brand: APEXi Pages: 18

Brand: Prorack Pages: 15

Brand: Axxess Pages: 8

Brand: Caltrend Pages: 2

Brand: Advanced ICE Pages: 4

Brand: Whispbar Pages: 15

Brand: PEUGEOT Pages: 232

iTrip Bluetooth

Brand: Griffin Technology Pages: 6

Pajero Pinin 1999

Brand: Mitsubishi Pages: 919

Brand: Acura Pages: 4

Brand: Ford Pages: 264

Brand: Subaru Pages: 399

Brand: Uniden Pages: 16

Brand: Chevrolet Pages: 55

Brand: Kargo Master Pages: 10

Brand: Baseus Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands