Chevrolet Silverado 2004 Owner'S Manual Download Page 122 | Manualshive

Page: 122 / 584

background image

Tow/Haul Mode
(Automatic Transmission)

Your vehicle may be equipped with a Tow/Haul mode.
The selector button is located on the end of the
column shift lever. You can use this feature to assist
when towing or hauling a heavy load. Turn Tow/Haul on
and off by pressing the button until the Tow/Haul
indicator light illuminates on the instrument panel. See
“Tow/Haul Mode” under Towing a Trailer on page 4-70
for more information.

Overdrive Disable
(Allison Transmission

®

)

If your vehicle has an Allison Transmission

®

you may

have the overdrive disable feature. The overdrive disable
feature prevents the transmission from shifting into
fifth (5) gear. The selector button is located on the end
of the column shift lever. You can turn overdrive
disable on and off by pressing and holding the button at
the end of the column shift lever until the indicator
light, on the instrument panel, illuminates.

2-30

«
...
120
121
122
123
124
...
»

Summary of Contents for Silverado 2004









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Silverado 2004

Brand: Jeep Pages: 603

Brand: Jeep Pages: 80

Brand: kaarta Pages: 29

Brand: Kathrein Pages: 7

Brand: Pacbrake Pages: 14

1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28

Brand: Havis-Shields Pages: 3

Quattroporte Automatic

Brand: Maserati Pages: 272

autoSteady AS101

Brand: Enduro Pages: 48

Brand: UAZ Pages: 90

Brand: WABCO Pages: 52

Alloy Rugged Ridge X-Clamp

Brand: Omix-Ada Pages: 2

Brand: Dodge Pages: 3

Brand: Subaru Pages: 540

Brand: Mercedes-Benz Pages: 27

LockNLoad LightenUp

Brand: Yakima Pages: 13

Brand: Menabo Pages: 4

Brand: Chevrolet Pages: 103

Brand: Peak Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands