Chevrolet Silverado 2004 Owner'S Manual Download Page 281 | Manualshive

Page: 281 / 584

background image

Video Screen

The video screen is located in the overhead console. To
use the video screen, push forward on the release
latch and the screen will fold down. Adjust the screen’s
position as desired. When the video screen is not in
use, push it up into its latched position.

The DVD player and display will continue to operate
when the screen is in the up or the down position. The
video screen contains the transmitters for the wireless
headphones and the remote control. If the screen
is in the closed position, the signals will not be
available for the operation of the headphones or the
remote control.

Notice: Directly touching the video screen
may damage it. Do not touch the screen. See
“Cleaning the Video Screen” later in this section
for more information.

DVD Player

The DVD player is located in the overhead console. The
DVD player can be controlled by the buttons on the
DVD player and/or by the buttons on the remote control.
See “Remote Control” later in this section for
more information.

The DVD player power may be turned on when the
ignition is in RUN, ACCESSORY, or when Retained
Accessory Power (RAP) is active.

The RSE system DVD player is only compatible with
DVDs of the appropriate region code for the country that
the vehicle was sold in. The DVD region code is
printed on the jacket of most DVDs.

Standard audio CDs, CD-R, CD-RW, Video CD and
Photo CD/CD-R media are fully supported by this DVD
player. DVD-R and DVD-RW media is supported if
formatted as DVD-Video. DVD+R and DVD+RW media
may or may not be supported by the DVD player.
The DVD player does not support DVD-RAM,
DVD-ROM, and DVD Audio media. An error message
will appear on the display if this type of media is inserted
into the DVD player.

When using the wired headphones, not included, if the
front seat passengers play a CD in the Radio with
Six-Disc CD (if equipped) or use XM™ Satellite Radio
Service (if equipped), you will hear the audio for
these sources, instead of the DVD or CD that is currently
playing through the RSE.

If an error message appears on the video screen, see
“DVD Messages” later in this section.

3-117

«
...
279
280
281
282
283
...
»

Summary of Contents for Silverado 2004









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Silverado 2004

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 2

Brand: Yakima Pages: 12

Brand: Fabbri Pages: 4

Brand: MAXWORKS Pages: 7

Truck Diesel Supplement 2012

Brand: RAM Pages: 174

Brand: Fast Master Products Pages: 13

Brand: Streetwize Pages: 4

Brand: Mazda Pages: 3

Brand: Grillo Pages: 71

Brand: Mitsubishi Pages: 490

Brand: Guardsman Pages: 2

Brand: ZENEC Pages: 2

DODGE AD100 1993

Brand: Chrysler Pages: 1502

Brand: Genesis Pages: 690

Q7 V12 TDI QUATTRO -

Brand: Audi Pages: 20

Brand: Camcar Pages: 6

330e Touring xDrive G21 2021

Brand: BMW Pages: 102

Brand: SAN HIMA Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands