Chevrolet 2008 Express Owner'S Manual Download

Page: 344 / 414

3. Pull the wheel toward the rear of the vehicle,

keeping the cable tight.

4. With the UP side facing you, attach the ratchet to

the wheel wrench.

5. Put the flat end of the wheel wrench on an angle

through the hole in the rear door frame, above the
bumper.

6. Raise the tire fully against the underside of the

vehicle. Continue turning the ratchet until the tire
is secure and the cable is tight. The spare tire hoist
cannot be overtightened.

7. Make sure the tire is stored securely. Push, pull (A),

and then try to turn (B) the tire. If the tire moves,
use the ratchet to tighten the cable.

You will hear two clicks when the tire is up all
the way.

8. Return the jacking equipment to the proper location.

Secure the items and replace the jack cover.

5-98

Summary of Contents for 2008 Express































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Express

Reviews:

Related manuals for 2008 Express

Brands by name

Popular brands

Chevrolet 2008 Express, Owner'S Manual

Search results

Summary of Contents for 2008 Express

Reviews:

Related manuals for 2008 Express

Brands by name

Popular brands