Chevrolet 2008 Express Owner'S Manual Download

Page: 13 / 414

4. Push the pin(s) marked “R” down until they are in

the retaining clip.

5. Push the pin(s) marked “L” down until they are in

the retaining clip.

6. If the vehicle has a floor mat, put the flap back to

its original position.

7. Repeat this procedure for the other seat base.

8. Connect the quick-release latch plates for the

lap-shoulder belts by inserting the latch plates
into the buckles attached at the outboard positions
of the bench seat. Do not twist the belt.

9. Check that all locking pins are locked into place

before operating the vehicle.

Three Passenger Seat Shown

1-9

Summary of Contents for 2008 Express































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Express

Reviews:

Related manuals for 2008 Express

Brands by name

Popular brands

Chevrolet 2008 Express, Owner'S Manual

Search results

Summary of Contents for 2008 Express

Reviews:

Related manuals for 2008 Express

Brands by name

Popular brands