Chevrolet 2008 Express Owner'S Manual Download

Page: 10 / 414

Rear Seats

Rear Seat Operation

Removing the Rear Seat

Disconnect the quick release latch plates for the
lap-shoulder belts on the bench seat to be removed.

1. To do this, press the

tip of a key into the
release hole of
the safety belt buckle
while pulling up on
the safety belt.

2. Locate the pins.

On a three passenger seat there are two pins
located on the inboard sides of the rear seats.

The driver’s side pin has a gray cap with a
black “L” marked on it.

Three Passenger Seat Shown

1-6

Summary of Contents for 2008 Express































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Express

Reviews:

Related manuals for 2008 Express

Brands by name

Popular brands

Chevrolet 2008 Express, Owner'S Manual

Search results

Summary of Contents for 2008 Express

Reviews:

Related manuals for 2008 Express

Brands by name

Popular brands