Chevrolet 2008 Express Owner'S Manual Download | Manualshive

Page: 75 / 414

background image

If a child restraint has been installed and the on
indicator is lit, turn the vehicle off. Remove the child
restraint from the vehicle and reinstall the child restraint
following the child restraint manufacturer’s directions
and refer to Securing a Child Restraint in the Right Front
Seat Position (With Passenger Sensing System) in
the Index.

If, after reinstalling the child restraint and restarting the
vehicle, the on indicator is still lit, check to make
sure that the vehicle’s seatback is not pressing the child
restraint into the seat cushion. If this happens, slightly
recline the vehicle’s seatback and adjust the seat
cushion if possible.

Remove any additional material from the seat such as
blankets, cushions, seat covers, seat heaters, or
seat massagers before reinstalling or securing the child
restraint.

If the on indicator is still lit, secure the child in the child
restraint in a rear seat position in the vehicle, and
check with your dealer/retailer. If no rear seat is
available, do not install a child restraint in this vehicle,
and check with your dealer/retailer.

The passenger sensing system is designed to enable
(may inflate) the right front passenger’s frontal
airbag anytime the system senses that a person of adult
size is sitting properly in the right front passenger’s

seat. When the passenger sensing system has allowed
the airbag to be enabled, the on indicator will light
and stay lit to remind you that the airbag is active.

For some children who have outgrown child restraints
and for very small adults, the passenger sensing
system may or may not turn off the right front passenger’s
frontal airbag, depending upon the person’s seating
posture and body build. Everyone in your vehicle who has
outgrown child restraints should wear a safety belt
properly — whether or not there is an airbag for that
person.

If a person of adult-size is sitting in the right front
passenger’s seat, but the off indicator is lit, it could be
because that person is not sitting properly in the seat. If
this happens, turn the vehicle off, remove any additional
material from the seat, such as blankets, cushions,
seat covers, seat heaters or seat massagers and ask
the person to place the seatback in the fully upright
position, then sit upright in the seat, centered on the seat
cushion, with the person’s legs comfortably extended.
Restart the vehicle and have the person remain in
this position for two to three minutes. This will allow the
system to detect that person and then enable the
right front passenger’s frontal airbag.

1-71

«
...
73
74
75
76
77
...
»

Summary of Contents for 2008 Express































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Express

Brand: Harken Hoister Pages: 12

Brand: Yamaha Pages: 2

RadioPRO 5 RP5-GM41

Brand: PAC Pages: 3

CARPOWER CAP-12XHQ

Brand: Monacor Pages: 5

Grand Cherokee WK2

Brand: Jeep Pages: 338

Brand: Trailboss Pages: 8

Brand: SnapPad Pages: 5

Brand: EUFAB Pages: 52

Brand: Thule Pages: 12

Brand: TOPPOINT Pages: 2

Brand: Speedtech Pages: 12

Brand: Mercedes-Benz Pages: 27

Brand: Honda Pages: 5

Brand: Kargo Master Pages: 8

Brand: Kargo Master Pages: 7

Brand: FALCON RIDGE Pages: 8

Brand: Metra Electronics Pages: 8

Brand: Funkwerk Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands