manualshive.com logo in svg

Chevrolet 2008 Express, Owner'S Manual

The Chevrolet 2008 Express Owner's Manual is a comprehensive guide that provides detailed information on operating and maintaining the vehicle. This essential manual is available for free download at manualshive.com, offering users easy access to valuable insights and instructions to ensure an optimal driving experience.

Share
Download
background image

{

CAUTION:

Getting under a vehicle when it is jacked up is
dangerous. If the vehicle slips off the jack you
could be badly injured or killed. Never get
under a vehicle when it is supported only by
a jack.

{

CAUTION:

Raising your vehicle with the jack improperly
positioned can damage the vehicle and even
make the vehicle fall. To help avoid personal
injury and vehicle damage, be sure to fit the
jack lift head into the proper location before
raising the vehicle.

5. Raise the vehicle by turning the ratchet clockwise.

Make sure the UP mark faces you. Raise the
vehicle far enough off the ground so there is enough
room for the spare tire to fit.

5-89

Summary of Contents for 2008 Express































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Express

LaserTrack Flare Installation Manual preview
Flare
Brand: LaserTrack Pages: 12
CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
Subaru 2005 Baja Owner'S Manual preview
2005 Baja
Brand: Subaru Pages: 34
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Flash Cover MN019 Instructions preview
MN019
Brand: Flash Cover Pages: 2
Porsche WTY 2010 Warranty & Maintenance Manual preview
WTY 2010
Brand: Porsche Pages: 98
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Dodge 2010 Challenger SRT Owner'S Manual preview
2010 Challenger SRT
Brand: Dodge Pages: 444
Ratio Power box Manual preview
Power box
Brand: Ratio Pages: 12
Horn Tools PHRRF002 Mounting Instructions preview
PHRRF002
Brand: Horn Tools Pages: 8
TrailFX 2123131 Quick User Manual preview
2123131
Brand: TrailFX Pages: 2
S&B Filters 75-5053 Installation Instructions preview
75-5053
Brand: S&B Filters Pages: 4
Mazda 2016 CX3 Service Information preview
2016 CX3
Brand: Mazda Pages: 3
Lippert Stargazer Spirit XTR Skylight Installation Manual preview
Stargazer Spirit XTR Skylight
Brand: Lippert Pages: 8

Brands by name

Popular brands

Load more brands