Chevrolet 2008 Colorado Owner'S Manual Download Page 140

Page: 140 / 440

Hazard Warning Flashers

The hazard warning flashers let you warn the police and
others that you have a problem. The front and rear
turn signal lamps will flash on and off.

The hazard warning flasher
button is located on the
instrument panel, between
the two air vents in the
center.

The hazard warning flashers work no matter what
position the key is in, and even if the key is not in
the ignition.

Press the button to make the front and rear turn signal
lamps flash on and off. Press the button again to
turn the flashers off.

When the hazard warning flashers are on, the turn
signals will not work.

Other Warning Devices

If you carry reflective triangles, you can set one up at
the side of the road about 300 feet (100 m) behind your
vehicle.

Horn

To sound the horn, press the horn symbol on the
steering wheel pad.

3-6

Summary of Contents for 2008 Colorado

























































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Colorado

Reviews:

Brands by name

Popular brands

Chevrolet 2008 Colorado, Owner'S Manual

Search results

Summary of Contents for 2008 Colorado

Reviews:

Brands by name

Popular brands