Chevrolet 2007 Silverado Owner'S Manual Download Page 591

Page: 591 / 688

3. Insert the hoist end

(open end) (F) of the
extension through
the hole (G) in
the rear bumper.

Be sure the hoist end of the extension (F)
connects to the hoist shaft (E). The ribbed
square end of the extension is used to lower
the spare tire.

4. Turn the wheel wrench (H) counterclockwise

to lower the spare tire to the ground. Continue
to turn the wheel wrench until the spare tire
can be pulled out from under the vehicle.

If the spare tire does not lower to the ground,
the secondary latch is engaged causing
the tire not to lower. See Secondary Latch
System on page 598.

5. Use the wheel

wrench hook which
allows you to
pull the hoist cable
towards you to
assist in reaching
the spare tire.

6. Tilt the retainer (D)

at the end of the
cable (C) when the
tire has been
lowered, so it can
be pulled up through
the wheel opening.

7. Put the spare tire near the flat tire.

591

Summary of Contents for 2007 Silverado

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Silverado

Reviews:

Related manuals for 2007 Silverado

Brands by name

Popular brands

Chevrolet 2007 Silverado, Owner'S Manual

Search results

Summary of Contents for 2007 Silverado

Reviews:

Related manuals for 2007 Silverado

Brands by name

Popular brands