Chevrolet 2007 Silverado, Owner'S Manual

Page: 113 / 688

Replacing Restraint System Parts
After a Crash
{
CAUTION:
A crash can damage the restraint systems
in your vehicle. A damaged restraint
system may not properly protect the
person using it, resulting in serious injury
or even death in a crash. To help make
sure your restraint systems are working
properly after a crash, have them inspected
and any necessary replacements made as
soon as possible.
If you have had a crash, do you need new belts or
LATCH system parts?
After a very minor collision, nothing may be
necessary. But if the belts were stretched, as they
would be if worn during a more severe crash,
then you need new parts.
If the LATCH system was being used during a
more severe crash, you may need new LATCH
system parts.
If belts are cut or damaged, replace them. Collision
damage may also mean you may need to have
LATCH system, safety belt or seat parts repaired or
replaced. New parts and repairs may be necessary
even if the belt or LATCH system was not being
used at the time of the collision.
If an airbag inflates, you will need to replace
airbag system parts. See the part on the airbag
system earlier in this section.
If an airbag inflates, you may also need to replace
the driver’s and right front passenger’s safety
belt assemblies. Be sure to do so. Then the new
assemblies will be there to help protect you in
a collision.
After a crash you may need to replace the driver
and front passenger’s safety belt assemblies,
even if the airbags have not deployed. Have your
safety belt pretensioners checked if your vehicle
has been in a collision, or if your airbag readiness
light stays on after you start your vehicle or while
you are driving. See Airbag Readiness Light
on page 256.
113