2. If the child restraint manufacturer recommends
that the top tether be attached, attach and
tighten the top tether to the top tether
anchor (loop), if your vehicle has one.
Refer to the child restraint instructions and
the following steps:
2.1. When using a child restraint with a top
tether in the rear driver side position:
A. Raise the head rest.
B. Route the top tether (B) between
the head rest posts, through the
loop (A), behind the inboard
head rest post, and under the
center shoulder belt (C).
C. Attach the top tether (B) to the top
tether anchor (loop) (D) at the
center rear seating position.
Example — Rear Driver’s Side Position
Example — Rear Driver’s Side Position
70
Summary of Contents for 2007 Silverado
