Chevrolet 2007 Silverado, Owner'S Manual

Page: 65 / 688

For crew and extended cab models, the top tether
anchors are the loops located near the top of
the seatback for each rear seating position.
These loops will be used to route the top tether
through, as well as, to secure the top tether in the
vehicle. Be sure to use an anchor (loop) located
on the same side of the vehicle as the seating
position where the child restraint will be placed.
Be sure to read the instructions following to
properly install a child restraint using these loops.
Do not secure a child restraint in the front
passenger’s position if your vehicle has rear seats,
if a national or local law requires that the top
tether be attached, or if the instructions that come
with the child restraint say that the top tether
must be attached. There is no place to attach the
top tether in this position.
Accident statistics show that children are safer if
they are restrained in the rear rather than the front
seat. See Where to Put the Restraint on page 58
for additional information.
Crew Cab Shown, Extended Cab Similar
65