Shifting In or Out of NEUTRAL
1. With the vehicle running and the engine at an
idle set the parking brake.
2. Place the transmission into NEUTRAL (N).
Shift the transfer case in one continuous motion
into or out of the NEUTRAL position.
Electronic Transfer Case
The transfer case knob
is located next to the
steering column.
Use the dial to shift into and out of four-wheel
drive.
Recommended Transfer Case Settings
Driving Conditions
Transfer Case Settings
2
m
4
m
4
n
N
Normal
YES
Severe
YES
Extreme
YES
Vehicle in Tow*
YES
*See Recreational Vehicle Towing on page 443
Towing Your Vehicle on page 443
You can choose among four driving settings:
Indicator lights in the dial show which setting you
are in. The indicator lights will come on briefly when
you turn on the ignition and one will stay on. If the
lights do not come on, you should take your vehicle
to your dealer for service. An indicator light flashes
while shifting the transfer case and remains
illuminated when the shift is complete. If for some
reason the transfer case cannot make a requested
shift, it will return to the last chosen setting.
2
m
(Two-Wheel-Drive High): This setting
is used for driving in most street and highway
situations. The front axle is not engaged in
Two-Wheel Drive. This setting also provides the
best fuel economy.
159
Summary of Contents for 2007 Silverado
