Chevrolet 2006 Avalanche Owner'S Manual Download

Page: 457 / 532

To release the spare tire from the secondary latch, do
the following:

1. Check under the vehicle to see if the cable end is

visible.

If the cable is not visible, proceed to Step 6.

2. If it is visible, first try to tighten the cable by

turning the wheel wrench clockwise until you hear
two clicks or feel it skip twice. You cannot
overtighten the cable.

3. Loosen the cable by turning the wheel wrench

counterclockwise three or four turns.

4. Repeat this procedure at least two times. If the

spare tire lowers to the ground, continue with
Step 5 of

Removing the Spare Tire and Tools on

page 5-86

5. Turn the wrench counterclockwise until

approximately 6 inches (15 cm) of cable is exposed.

6. Stand the wheel blocks on their shortest ends, with

the backs facing each other.

7. Place the bottom edge

of the jack (A) on the
wheel blocks (B),
separating them so that
the jack is balanced
securely.

5-97

Summary of Contents for 2006 Avalanche





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands

Chevrolet 2006 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands