Chevrolet 2006 Avalanche Owner'S Manual Download

Page: 446 / 532

Removing the Spare Tire and Tools

The jack and the wheel blocks are located under a
cover near the passenger side rear seat.

To remove the jack and wheel blocks, do the following:

1. Remove the jack cover by turning the two wing nuts

one-quarter turn counterclockwise and pulling the
jack cover off.

A. Wheel Blocks
B. Knob
C. Wing Nut
D. Retaining Hook

E. Jack
F. Jack Head
G. Mounting Bracket

2. Release the jack (E) from the mounting bracket (G)

by turning the knob (B) on the jack counterclockwise
to lower the jack head (F) from the mounting bracket.

3. Remove the wheel blocks (A) attached to the jack (E)

by turning the wing nut (C) counterclockwise. Place
the wheel blocks where needed as indicated in
previously in this section.

Rear Seat (Passenger Side) Jack Cover

5-86

Summary of Contents for 2006 Avalanche





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands

Chevrolet 2006 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands