Chevrolet 2006 Avalanche Owner'S Manual Download Page 270 | Manualshive

Page: 270 / 532

background image

DVD Player

The DVD player is located in the overhead console. The
DVD player can be controlled by the buttons on the
DVD player and/or by the buttons on the remote control.
See “Remote Control” later in this section for more
information.

The DVD player power may be turned on when the
ignition is in RUN, ACCESSORY, or when Retained
Accessory Power (RAP) is active.

The RSE system DVD player is only compatible with
DVDs of the appropriate region code for the country that
the vehicle was sold in. The DVD region code is
printed on the jacket of most DVDs.

Standard audio CDs, CD-R, CD-RW, Video CD and
Photo CD/CD-R media are fully supported by this DVD
player. DVD-R and DVD-RW media is supported if
formatted as DVD-Video. DVD+R and DVD+RW media
may or may not be supported by the DVD player.
The DVD player does not support DVD-RAM,
DVD-ROM, and DVD Audio media. An error message
will appear on the display if this type of media is inserted
into the DVD player.

When using the wired headphones, not included, if the
front seat passengers play a CD in the Radio with
Six-Disc CD (if equipped) or use XM™ Satellite Radio

Service (if equipped), you will hear the audio for these
sources, instead of the DVD or CD that is currently
playing through the RSE.

If an error message appears on the video screen, see
“DVD Messages” later in this section.

DVD Player Buttons

O

(Power):

Press this button to turn the RSE system

on and off. The power indicator light will illuminate
when the power is on.

X

(Eject):

Press this button to eject a DVD or CD.

SRCE (Source):

Press this button to switch between

the DVD player and an auxiliary source.

3-102

«
...
268
269
270
271
272
...
»

Summary of Contents for 2006 Avalanche





















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2006 Avalanche

Brand: Acdeos Pages: 38

Brand: Back View Pages: 168

Brand: Kathrein Pages: 7

Brand: APEXi Pages: 18

Brand: Prorack Pages: 15

ANDROID INTERFACE

Brand: GMC Pages: 18

Brand: Prorack Pages: 15

Brand: EUFAB Pages: 12

Brand: Cadillac Pages: 518

Brand: Opel Pages: 141

autoSteady AS101

Brand: Enduro Pages: 48

Bluetooth Phone System 2010

Brand: Kia Pages: 16

Brand: Hummer Pages: 31

Brand: Volvo Pages: 10

MAGICGRIP MGQDWD-CPO

Brand: Scosche Pages: 12

Brand: DICE Pages: 1

Brand: Hudson Pages: 24

Brand: UCANDAS Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands