Chevrolet 2006 Avalanche Owner'S Manual Download

Page: 416 / 532

A. Low-Beam Headlamp
B. High-Beam Headlamp

6. Turn the bulb connector counterclockwise and pull it

out of the assembly.

7. Unplug the electrical connector from the old bulb.

8. Plug in the electrical connector to the new bulb.

9. Place the connector with the new bulb into

the headlamp assembly and turn it clockwise until it
is tight.

10. Put the headlamp assembly back into the vehicle

and reinstall the two pins.

11. Place the inboard end of the turn signal/parking

lamp assembly into the pocket.

12. Push the outboard side of the assembly in until the

release clip snaps into place.

Vehicles without Body-Side Cladding

To replace a headlamp bulb, do the following:

1. Open the hood. See

Hood Release on page 5-12

for more information.

2. Remove the pin on the headlamp assembly by

turning the pin up and pulling it straight out.

3. Pull the headlamp assembly out.

5-56

Summary of Contents for 2006 Avalanche





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands

Chevrolet 2006 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands