Chevrolet 2006 Avalanche Owner'S Manual Download | Manualshive

Page: 249 / 532

background image

Playing a CD

Insert a CD part way into the slot, label side up. The
player will pull it in and the CD should begin playing. If
you want to insert a CD with the ignition off, first
press the eject button or the INFO knob.

If the ignition or radio is turned off with the CD in the
player, it will stay in the player. When the ignition
or radio is turned on, the CD will start playing where it
stopped, if it was the last selected audio source.

When a CD is inserted, the CD symbol will appear on
the display. As each new track starts to play, the
track number will appear on the display.

The CD player can play the smaller 3 inch (8 cm) single
CDs with an adapter ring. Full-size CDs and the
smaller CDs are loaded in the same manner.

If playing a CD-R, the sound quality may be reduced
due to CD-R quality, the method of recording, the quality
of the music that has been recorded, and the way the
CD-R has been handled. There may be an increase
in skipping, difficulty in finding tracks, and/or difficulty in
loading and ejecting. If these problems occur, check
the bottom surface of the CD. If the surface of the CD is
damaged, such as cracked, broken, or scratched, the
CD will not play properly. If the surface of the CD
is soiled, see

Care of Your CDs and DVDs on

page 3-114

for more information.

If there is no apparent damage, try a known good CD.

Do not add any label to a CD, it could get caught in the
CD player. If a CD is recorded on a personal computer
and a description label is needed, try labeling the top of
the recorded CD with a marking pen instead.

Notice:

If you add any label to a CD, insert more

than one CD into the slot at a time, or attempt
to play scratched or damaged CDs, you could
damage the CD player. When using the CD player,
use only CDs in good condition without any
label, load one CD at a time, and keep the CD player
and the loading slot free of foreign materials,
liquids, and debris.

If an error appears on the display, see “CD Messages”
later in this section.

1 PREV (Previous):

Press this pushbutton to go to the

beginning of the current track if more than eight seconds
have played. TRACK and the track number will appear on
the display. If this pushbutton is held or pressed more
than once, the player will continue moving backward
through the CD.

2 NEXT:

Press this pushbutton to go to the next track.

TRACK and the track number will appear on the
display. If this pushbutton is held or pressed more than
once, the player will continue moving forward through
the CD.

3-81

«
...
247
248
249
250
251
...
»

Summary of Contents for 2006 Avalanche





















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2006 Avalanche

Brand: Valeo Pages: 17

Brand: JANE Pages: 21

Brand: Kia Pages: 385

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

STRONGARM RVR303

Brand: Blue Giant Pages: 48

Gasoline/Electric DS Golf Car 1996

Brand: Club Car Pages: 48

Brand: Axxess Pages: 8

Brand: MAXWORKS Pages: 7

Brand: EZTRUNK Pages: 3

StreetLine Series

Brand: SAAS Pages: 4

Brand: Yakima Pages: 12

Brand: FALCON RIDGE Pages: 6

Brand: Hama Pages: 4

Brand: Volvo Pages: 230

Brand: Mitsubishi Pages: 19

Magic Watch MWE-850-4DSM

Brand: Waeco Pages: 204

2917 Nstallation

Brand: Edelbrock Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands