30
Additional control functions
In addition, the remote control can also be used to set a number of additional
functions:
• Time and date
• Temperature display in degrees Celsius or Fahrenheit
• Snooze mode
• Thermostat function
Caution
- Although highly improbable, we cannot rule out that your appliance’s
ignition process can be started unintentionally through other remote controls. For
example the remote control of your neighbours’ gas heater, but also car keys and
garage door openers. The result will be that your appliance will burn when you do not
want it to.
Unintended ignition of your appliance could be solved or prevented by turning
the ON/OFF switch or closing the gas tap near your appliance. This is the safest
precaution if the appliance is not is use for long periods to turn the ON/OFF switch to
the OFF position and to close the gas tap near your appliance.
Setting the time
Enter the SETUP menu. Hold the handset to unlock the keypad and keep held
throughout the following steps.
Press and hold SET for several seconds. The symbol in the top centre will flash. Press
and release the “mode” button several times until the word “SETUP” appears flashing
in the top right corner of the display.
Press and release “set” again to enter the “SETUP” menu.
Here you can change the clock from 12 hour or 24 hour format, the day of the week,
hour of the day, minute of the day and the display in Celsius or Fahrenheit.
To navigate through the menu “SET” moves to the next parameter and “Mode” move
back to the previous parameter. “+” and “-“ change the display parameter.
Setting the display for 12 or 24 Hour display:
The H indicates that it is time to set the timer to either 24 hour display or 12 Hour (AM
or PM) display. Press the “+” or “–” button on the handset to toggle between the two
settings. When you are ready to confirm the setting you want press the “SET” button
to progress to setting the day of the week.
