27
TESC Control
Control System Information TESC
The appliance is fitted with the Thermo Electric Safety Control (TESC). The system
operates on radio frequency and has a remote control handset.
The gas control has an automatic ignition system, therefore does not have a standing
pilot.
The control required 3 AA size alkaline batteries to be inserted under the battery
compartment cover.
The handset and control device has been paired up and is ready to use.
Handset
Ensure the power isolator switch on the front of Fire Control is in the on position I.
NOTE
: For safety reasons a button must be pressed and released for the command to
be recognized. Keeping hold of a button when pressing (unless otherwise instructed)
will not be recognized as a command.
To operate the handset it must be held in your hand so always ensure you have a
good grip around the handset to unlock its functions.
The green unlock light will illuminate to show when the handset is unlocked and ready
to accept commands.
This operation must be performed each time you want to operate the handset.
