English language
Use and maintenance
35
MAINTENANCE INFORMATION
7
Safety advice for maintenance
Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine
off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary
maintenance envisaged in the instruction manual.
Special maintenance operations (non included in
this handbook) require a specialised workshop on
the premises which meets the requirements speci-
fied by the relative laws in force (appropriate equip-
ment suitably trained staff etc.); if you do not have a
compliant workshop, contact an authorised one.
Maintenance interval schedule
To guarantee constant, efficient and safe machine op-
eration, ensure all the maintenance envisaged by the
manufacturer is carried out.
Maintenance schedule
Tyre check
Check the tyres for wear and if they feature tears or signs
of ageing, they must be replaced.
Check and if necessary restore the tyre pressure (see the
“Technical characteristics” table).
Cleaning the work vehicle
Clean the work vehicle with a high-pressure water jet
and, if necessary, with approved detergents.
The liquid used for washing could be hazardous for the
environment due to the presence of pollutants such as
detergents, oils, etc., therefore do not simply dump the
wastewater; dispose of it in suitable areas equipped with
separation devices for the pollutants.
Dry with compressed air and lubricate the components
shown (see “Lubrication diagram”).
Check of nuts and bolts tightening torque
Check the tightening torque of all nuts and bolts.
If bolts are loose, tighten them according to the correct
torque values (see “Nuts and bolts tightening torque ta-
ble”).
Maintenance intervals
Frequency
Component
Type of work
Manual reference
Every hour
Dispenser
Cleaning
Ploughshare
Cleaning
Every day
Lift frame
Integrity check
Guards
Integrity check
Guards
Warning and hazard plates
Inspection
Information and safety signs
Every 50 hours
Machine components
Greasing
Lubrication diagram
Nuts and bolts
Tightening
Check of nuts and bolts tightening torque
Every 150 hours Tyres
Pressure check
Tyre check
